Wiper Arm Types, Explained

By Nan Liang · Updated 2026-11-20

Most cars use one of five wiper arm connectors: the J-hook, the slimmer 9×3 hook (a 9 mm × 3 mm hook cross-section, the current US standard on Toyota, Honda, Nissan and most domestics), side lock (common on Ford and GM trucks), pinch tab, and the European bayonet / top lock. You can identify yours in seconds by looking at how the blade meets the arm.

The five types

Arm typeWhat it looks likeCommon on
J-hookA hook bent 90° at the end of the arm; blade slides in from the sideOlder Japanese and domestic cars
9×3 hookA slimmer, flatter hook — cross-section measures about 9 mm wide, 3 mm thick2005+ Toyota, Honda, Nissan, Hyundai, Kia
Side lockA button or tab on the side of the arm; press it and the blade slides off the pinFord F-150, GM trucks and SUVs
Pinch tabTwo small tabs you squeeze together to release the bladeSome Chrysler, Dodge, Jeep models
Bayonet / top lockA push-button on top; blade pushes straight on and offMercedes-Benz, BMW, VW, Audi

How to check in 10 seconds

  1. Lift the armPull the wiper arm away from the glass until it stands on its own.
  2. Look at the jointCurved hook = J-hook or 9×3 hook (measure the hook width with a ruler: 9 mm flat = 9×3). A side button = side lock. Squeeze tabs = pinch tab. A top button = bayonet.
  3. Read the old bladeMost replacement blades print the arm type on the adapter — the fastest confirmation of all.

Does the arm type change the blade length?

No. Arm type and blade length are independent: a 26″ blade exists for every arm type. That's why our size charts list the two separately — get the length from the chart, then match the connector when you buy. If you're between sizes after measuring, see how to measure wiper blades before guessing.

Related

Wiper sizes A–Z →

Find your vehicle's blade sizes

Wiper arm types →

Identify your connector

How to measure blades →

Verify before you buy